diff --git a/README.md b/README.md
index 23aea01..137709c 100644
--- a/README.md
+++ b/README.md
@@ -10,119 +10,105 @@ The whole project is licensed under GPL-3, with excpetion of the *lib* folder, s
 │   └── wallpapers # My wallpapers
 ├── flake.lock # Lock file
 ├── flake.nix # Flake inputs
-├── hosts
-│   ├── default.nix
+├── hosts # My different hosts
+│   ├── default.nix # Where the different hosts are specified
 │   └── vali
-│       └── mars
-│           ├── awesome
-│           │   └── awesome.nix
-│           ├── configuration.nix
+│       └── mars # My main computer 
+│           ├── configuration.nix # Main configuration file 
 │           ├── default.nix
-│           ├── hardware-configuration.nix
-│           ├── profile.nix
-│           └── programs.nix
+│           ├── hardware-configuration.nix # Hardware config for my system
+│           ├── profile.nix # importing different system options
+│           └── programs.nix # Installed Programs
 ├── lib
 │   ├── default.nix
-│   └── options.nix
+│   └── options.nix # For the future: some options to set if I need them
 ├── LICENSE
 ├── modules
 │   ├── cli
 │   │   ├── default.nix
-│   │   ├── fish.nix
-│   │   ├── neovim.nix
-│   │   └── nh.nix
+│   │   ├── fish.nix # Fish shell config
+│   │   ├── neovim.nix # Incomplete neovim config
+│   │   └── nh.nix # nix helper config
 │   ├── default.nix
-│   ├── editors
-│   │   ├── default.nix
-│   │   └── emacs.nix
+│   ├── editors # My different editors
+│   │   ├── default.nix 
+│   │   ├── emacs.nix # Emacs config
+│   │   ├── helix.nix # Helix config
+│   │   ├── kakoune.nix # Kakoune config
+│   │   └── neovim.nix # Neovim config
 │   ├── gui
-│   │   ├── anyrun
-│   │   │   ├── anyrun.nix
+│   │   ├── anyrun # My Anyrun config
+│   │   │   ├── anyrun.nix # Anyrun config
 │   │   │   ├── default.nix
-│   │   │   └── style.css
+│   │   │   └── style.css # Anyrun styling
 │   │   ├── default.nix
-│   │   ├── emacs
-│   │   │   ├── default.nix
-│   │   │   ├── doom.d
-│   │   │   └── emacs.nix
-│   │   ├── firefox.nix
-│   │   ├── foot.nix
-│   │   ├── gtk.nix
-│   │   ├── kakoune
-│   │   │   ├── default.nix
-│   │   │   ├── kak-lsp.toml
-│   │   │   ├── kakoune.nix
-│   │   │   ├── kakrc
-│   │   │   └── starship.toml
-│   │   ├── kakoune.nix
-│   │   ├── kitty.nix
-│   │   ├── minecraft.nix
-│   │   ├── mpv.nix
-│   │   ├── qt.nix
-│   │   ├── rofi.nix
-│   │   ├── schizofox.nix
-│   │   ├── spicetify.nix
-│   │   ├── steam.nix
-│   │   ├── stylix.nix
-│   │   ├── vesktop.nix
-│   │   ├── vivado.nix
-│   │   ├── waybar.nix
-│   │   └── zathura.nix
+│   │   ├── foot.nix # Foot config
+│   │   ├── gtk.nix # Gtk config
+│   │   ├── kitty.nix # Kitty config
+│   │   ├── minecraft.nix # Minecraft config
+│   │   ├── mpv.nix # Mpv config
+│   │   ├── qt.nix # Qt config
+│   │   ├── rofi.nix # Rofi config
+│   │   ├── schizofox.nix # Schizofox config
+│   │   ├── spicetify.nix # Spotify config
+│   │   ├── steam.nix # Steam config
+│   │   ├── stylix.nix # Stylix config
+│   │   ├── vesktop.nix # Discord config
+│   │   ├── vivado.nix # Vivado my beloved <3
+│   │   ├── waybar.nix # Waybar config
+│   │   └── zathura.nix # Zathura config
 │   ├── other
 │   │   ├── default.nix
-│   │   ├── home-manager.nix
-│   │   ├── system.nix
-│   │   └── xdg.nix
+│   │   ├── home-manager.nix # Home Manager config
+│   │   ├── system.nix # System config
+│   │   └── xdg.nix # XDG config
 │   ├── services
 │   │   ├── default.nix
-│   │   ├── dunst.nix
-│   │   ├── greetd.nix
-│   │   ├── pipewire.nix
-│   │   └── ssh.nix
+│   │   ├── dunst.nix # Dunst Daemon config
+│   │   ├── greetd.nix # Greetd greeter config
+│   │   ├── pipewire.nix # Audio config
+│   │   └── ssh.nix # Ssh config
 │   ├── tui
-│   │   ├── btop.nix
-│   │   ├── config
+│   │   ├── btop.nix # btop config
 │   │   ├── default.nix
-│   │   ├── helix.nix
-│   │   ├── ncmpcpp.nix
-│   │   ├── neovim.nix
-│   │   ├── newsboat.nix
-│   │   └── yazi.nix
-│   └── wms
-│       ├── wayland
+│   │   ├── ncmpcpp.nix # Ncmpcpp config
+│   │   ├── newsboat.nix # Newsboat config
+│   │   └── yazi.nix # Yazi config
+│   └── wms # My different Window Managers
+│       ├── wayland # Wayland Compositors
 │       │   ├── default.nix
-│       │   ├── hypr
+│       │   ├── hypr # Hypr* stuff
 │       │   │   ├── default.nix
-│       │   │   ├── idle.nix
-│       │   │   ├── land.nix
-│       │   │   ├── lock.nix
-│       │   │   └── paper.nix
-│       │   ├── niri
-│       │   │   ├── config.nix
+│       │   │   ├── idle.nix # Hypridle config
+│       │   │   ├── land.nix # Hyprland config
+│       │   │   ├── lock.nix # Hyprlock config
+│       │   │   └── paper.nix # Hyprpaper config
+│       │   ├── niri # The Miri compositor
+│       │   │   ├── config.nix # Niri config
 │       │   │   └── default.nix
-│       │   ├── services.nix
-│       │   └── variables.nix
-│       └── x
-│           ├── awesome
-│           │   ├── awesome.nix
-│           │   └── rc.lua
+│       │   ├── services.nix # Enabled services I need in wayland
+│       │   └── variables.nix # Wayland system variables
+│       └── x # My X window managers 
+│           ├── awesome # Awesome window manager
+│           │   ├── awesome.nix # Awesome config
+│           │   └── rc.lua #  Awesome config file
 │           └── default.nix
 ├── notes.md
-├── options
+├── options # Options for my system
 │   ├── boot
-│   │   └── grub-boot.nix
+│   │   └── grub-boot.nix # Grub config
 │   ├── common
-│   │   ├── bluetooth.nix
+│   │   ├── bluetooth.nix # Bluetooth
 │   │   ├── gpu
-│   │   │   └── nvidia.nix
-│   │   ├── networking.nix
-│   │   ├── pin-registry.nix
-│   │   └── preserve-system.nix
+│   │   │   └── nvidia.nix # Fuck Nvidia
+│   │   ├── networking.nix # Networking config
+│   │   ├── pin-registry.nix # No idea
+│   │   └── preserve-system.nix # No idea
 │   └── desktop
-│       ├── fonts.nix
-│       └── monitors.nix
-├── overlay.nix
-└── README.md
+│       ├── fonts.nix # My fonts
+│       └── monitors.nix # Monitor config
+├── overlay.nix # Overlays
+└── README.md # This file # This file
 ```
 # credits
 *heavily* inspired by https://git.jacekpoz.pl/jacekpoz/niksos.git !
diff --git a/modules/tui/helix.nix b/modules/editors/helix.nix
similarity index 100%
rename from modules/tui/helix.nix
rename to modules/editors/helix.nix
diff --git a/modules/gui/kakoune.nix b/modules/editors/kakoune.nix
similarity index 100%
rename from modules/gui/kakoune.nix
rename to modules/editors/kakoune.nix
diff --git a/modules/gui/kakoune/default.nix b/modules/editors/kakoune/default.nix
similarity index 100%
rename from modules/gui/kakoune/default.nix
rename to modules/editors/kakoune/default.nix
diff --git a/modules/gui/kakoune/kak-lsp.toml b/modules/editors/kakoune/kak-lsp.toml
similarity index 100%
rename from modules/gui/kakoune/kak-lsp.toml
rename to modules/editors/kakoune/kak-lsp.toml
diff --git a/modules/gui/kakoune/kakoune.nix b/modules/editors/kakoune/kakoune.nix
similarity index 100%
rename from modules/gui/kakoune/kakoune.nix
rename to modules/editors/kakoune/kakoune.nix
diff --git a/modules/gui/kakoune/kakrc b/modules/editors/kakoune/kakrc
similarity index 100%
rename from modules/gui/kakoune/kakrc
rename to modules/editors/kakoune/kakrc
diff --git a/modules/gui/kakoune/starship.toml b/modules/editors/kakoune/starship.toml
similarity index 100%
rename from modules/gui/kakoune/starship.toml
rename to modules/editors/kakoune/starship.toml
diff --git a/modules/gui/emacs/default.nix b/modules/gui/emacs/default.nix
deleted file mode 100644
index 4002377..0000000
--- a/modules/gui/emacs/default.nix
+++ /dev/null
@@ -1 +0,0 @@
-_: { imports = [ ./emacs.nix ]; }
diff --git a/modules/gui/emacs/emacs.nix b/modules/gui/emacs/emacs.nix
deleted file mode 100644
index ec93acb..0000000
--- a/modules/gui/emacs/emacs.nix
+++ /dev/null
@@ -1,23 +0,0 @@
-{ config, lib, pkgs, inputs, ... }:
-with lib;
-let
-  cfg = config.modules.programs.emacs;
-  username = config.modules.other.system.username;
-in {
-  options.modules.programs.emacs.enable = mkEnableOption "emacs";
-
-  config = mkIf cfg.enable {
-    home-manager.users.${username} = {
-      programs.doom-emacs = {
-        enable = true;
-        extraConfig = ''
-          (setq standard-indent 2)
-          (require 'evil)
-          (evil-mode 1)
-        '';
-        doomPrivateDir = ./doom.d;
-      };
-    };
-  };
-
-}
diff --git a/modules/gui/firefox.nix b/modules/gui/firefox.nix
deleted file mode 100644
index 96775d7..0000000
--- a/modules/gui/firefox.nix
+++ /dev/null
@@ -1,74 +0,0 @@
-{ config, lib, inputs, pkgs, ... }:
-with lib;
-let
-  username = config.modules.other.system.username;
-  cfg = config.modules.programs.firefox;
-in {
-  options.modules.programs.firefox = {
-    enable = mkEnableOption "firefox";
-    extensions = mkOption {
-      description =
-        "firefox extensions (format like https://discourse.nixos.org/t/declare-firefox-extensions-and-settings/36265)";
-      type = types.attrs;
-      default = { };
-    };
-  };
-
-  config = mkIf cfg.enable {
-    home-manager.users.${username} = {
-      programs.firefox = {
-        enable = true;
-
-        policies = {
-          DisableTelemetry = true;
-          DisableFirefoxStudies = true;
-          EnableTrackingProtection = {
-            Value = true;
-            Locked = true;
-            Cryptomining = true;
-            Fingerprinting = true;
-          };
-          DisablePocket = true;
-          DisableFirefoxAccounts = true;
-          DisableAccounts = true;
-          DisableFirefoxScreenshots = true;
-          OverrideFirstRunPage = "";
-          OverridePostUpdatePage = "";
-          DontCheckDefaultBrowser = true;
-          DisplayBookmarksToolbar =
-            "never"; # alternatives: "always" or "newtab"
-          DisplayMenuBar =
-            "default-off"; # alternatives: "always", "never" or "default-on"
-          SearchBar = "unified"; # alternative: "separate"
-          FirefoxSuggest = {
-            WebSuggestions = true;
-            ImproveSuggest = true;
-            Locked = true;
-          };
-          SearchSuggestEnabled = true;
-          theme = {
-            colors = {
-              background-darker = "181825";
-              background = "1e1e2e";
-              foreground = "cdd6f4";
-            };
-          };
-
-          OfferToSaveLogins = false;
-
-          font = "Lexend";
-          ExtensionSettings = lib.mkMerge [
-            {
-              "uBlock0@raymondhill.net" = {
-                install_url =
-                  "https://addons.mozilla.org/firefox/downloads/latest/ublock-origin/latest.xpi";
-                installation_mode = "force_installed";
-              };
-            }
-            cfg.extensions
-          ];
-        };
-      };
-    };
-  };
-}
diff --git a/modules/tui/config b/modules/tui/config
deleted file mode 100644
index e62ec46..0000000
--- a/modules/tui/config
+++ /dev/null
@@ -1,598 +0,0 @@
-##############################################################
-## This is an example configuration file. Copy it to        ##
-## $XDG_CONFIG_HOME/ncmpcpp/config or $HOME/.ncmpcpp/config ##
-## and set up your preferences.                             ##
-##############################################################
-#
-##### directories ######
-##
-## Directory for storing ncmpcpp related files.  Changing it is useful if you
-## want to store everything somewhere else and provide command line setting for
-## alternative location to config file which defines that while launching
-## ncmpcpp.
-##
-#
-ncmpcpp_directory = ~/.config/ncmpcpp
-#
-##
-## Directory for storing downloaded lyrics. It defaults to ~/.lyrics since other
-## MPD clients (eg. ncmpc) also use that location.
-##
-#
-#lyrics_directory = ~/.lyrics
-#
-##### connection settings #####
-#
-#mpd_host = localhost
-#
-mpd_port = 6600
-#
-mpd_connection_timeout = 5
-#
-## Needed for tag editor and file operations to work.
-##
-mpd_music_dir = ~/Nextcloud/Media/Music
-#
-#mpd_crossfade_time = 5
-#
-# Exclude pattern for random song action
-# http://www.boost.org/doc/libs/1_46_1/libs/regex/doc/html/boost_regex/syntax/perl_syntax.html
-#random_exclude_pattern = "^(temp|midi_songs).*"
-#
-##### music visualizer #####
-##
-## In order to make music visualizer work with MPD you need to use the fifo
-## output. Its format parameter has to be set to 44100:16:1 for mono
-## visualization or 44100:16:2 for stereo visualization. As an example here is
-## the relevant section for mpd.conf:
-##
-## audio_output {
-##        type            "fifo"
-##        name            "Visualizer feed"
-##        path            "/tmp/mpd.fifo"
-##        format          "44100:16:2"
-## }
-##
-## If the visualization on occasion diverges from the audio output, please set
-## 'buffer_time' parameter of your audio output in mpd.conf to '100000' (100ms)
-## or less to prevent that from happening.
-##
-## Note: If you're using Mopidy, an address of a udpsink gstreamer's output is
-## also accepted. For example, the following section in mopidy.conf:
-##
-## [audio]
-## output = tee name=t ! queue ! autoaudiosink t.
-##        ! queue ! audio/x-raw,rate=44100,channels=2,format=S16LE
-##        ! udpsink host=localhost port=5555
-##
-## will make localhost:5555 available as a source of data for the stereo
-## visualizer.
-##
-#
-visualizer_data_source = /tmp/mpd.fifo
-#
-##
-## Note: Below parameter is needed for ncmpcpp to determine which output
-## provides data for visualizer and reset it at the beginning of visualization
-## to synchronize with audio.
-##
-#
-visualizer_output_name = Visualizer feed
-#
-##
-## If you set format to 44100:16:2, make it 'yes'.
-##
-visualizer_in_stereo = yes
-#
-##
-## Note: set below to >=10 only if you have synchronization issues with
-## visualization and audio.
-##
-#
-visualizer_sync_interval = 0
-#
-##
-## Note: To enable spectrum frequency visualization you need to compile ncmpcpp
-## with fftw3 support.
-##
-#
-## Available values: spectrum, wave, wave_filled, ellipse.
-##
-visualizer_type = wave_filled
-#
-visualizer_fps = 60
-#
-visualizer_autoscale = no
-#
-visualizer_look = ●▮
-#
-visualizer_color = blue, cyan, green, yellow, magenta, red
-#
-## Alternative subset of 256 colors for terminals that support it.
-##
-#visualizer_color = 47, 83, 119, 155, 191, 227, 221, 215, 209, 203, 197, 161
-#
-##
-## Note: The next few visualization options apply to the spectrum visualizer.
-##
-#
-## Use unicode block characters for a smoother, more continuous look.
-## This will override the visualizer_look option. With transparent terminals
-## and visualizer_in_stereo set, artifacts may be visible on the bottom half of
-## the visualization.
-#
-visualizer_spectrum_smooth_look = yes
-#
-## A value between 1 and 5 inclusive. Specifying a larger value makes the
-## visualizer look at a larger slice of time, which results in less jumpy
-## visualizer output.
-#
-#visualizer_spectrum_dft_size = 2
-#
-#visualizer_spectrum_gain = 10
-#
-## Left-most frequency of visualizer in Hz, must be less than HZ MAX
-#
-#visualizer_spectrum_hz_min = 20
-#
-## Right-most frequency of visualizer in Hz, must be greater than HZ MIN
-#
-#visualizer_spectrum_hz_max = 20000
-#
-##### system encoding #####
-##
-## ncmpcpp should detect your charset encoding but if it failed to do so, you
-## can specify charset encoding you are using here.
-##
-## Note: You can see whether your ncmpcpp build supports charset detection by
-## checking output of `ncmpcpp --version`.
-##
-## Note: Since MPD uses UTF-8 by default, setting this option makes sense only
-## if your encoding is different.
-##
-#
-#system_encoding = ""
-#
-##### delays #####
-#
-## Time of inactivity (in seconds) after playlist highlighting will be disabled
-## (0 = always on).
-##
-#playlist_disable_highlight_delay = 5
-#
-## Defines how long messages are supposed to be visible.
-##
-#message_delay_time = 5
-#
-##### song format #####
-##
-## For a song format you can use:
-##
-## %l - length
-## %f - filename
-## %D - directory
-## %a - artist
-## %A - album artist
-## %t - title
-## %b - album
-## %y - date
-## %n - track number (01/12 -> 01)
-## %N - full track info (01/12 -> 01/12)
-## %g - genre
-## %c - composer
-## %p - performer
-## %d - disc
-## %C - comment
-## %P - priority
-## $R - begin right alignment
-##
-## If you want to make sure that a part of the format is displayed only when
-## certain tags are present, you can archieve it by grouping them with brackets,
-## e.g. '{%a - %t}' will be evaluated to 'ARTIST - TITLE' if both tags are
-## present or '' otherwise.  It is also possible to define a list of
-## alternatives by providing several groups and separating them with '|',
-## e.g. '{%t}|{%f}' will be evaluated to 'TITLE' or 'FILENAME' if the former is
-## not present.
-##
-## Note: If you want to set limit on maximal length of a tag, just put the
-## appropriate number between % and character that defines tag type, e.g. to
-## make album take max. 20 terminal cells, use '%20b'.
-##
-## In addition, formats support markers used for text attributes.  They are
-## followed by character '$'. After that you can put:
-##
-## - 0 - default window color (discards all other colors)
-## - 1 - black
-## - 2 - red
-## - 3 - green
-## - 4 - yellow
-## - 5 - blue
-## - 6 - magenta
-## - 7 - cyan
-## - 8 - white
-## - 9 - end of current color
-## - b - bold text
-## - u - underline text
-## - r - reverse colors
-## - a - use alternative character set
-##
-## If you don't want to use a non-color attribute anymore, just put it again,
-## but this time insert character '/' between '$' and attribute character,
-## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename with
-## reversed colors.
-##
-## If you want to use 256 colors and/or background colors in formats (the naming
-## scheme is described below in section about color definitions), it can be done
-## with the syntax $(COLOR), e.g. to set the artist tag to one of the
-## non-standard colors and make it have yellow background, you need to write
-## $(197_yellow)%a$(end). Note that for standard colors this is interchangable
-## with attributes listed above.
-##
-## Note: colors can be nested.
-##
-#
-#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3%l$9}
-#
-#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
-#
-#song_library_format = {%n - }{%t}|{%f}
-#
-#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
-#
-#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
-#
-#current_item_prefix = $(yellow)$r
-#
-#current_item_suffix = $/r$(end)
-#
-#current_item_inactive_column_prefix = $(white)$r
-#
-#current_item_inactive_column_suffix = $/r$(end)
-#
-#now_playing_prefix = $b
-#
-#now_playing_suffix = $/b
-#
-#browser_playlist_prefix = "$2playlist$9 "
-#
-#selected_item_prefix = $6
-#
-#selected_item_suffix = $9
-#
-#modified_item_prefix = $3> $9
-#
-##
-## Note: attributes are not supported for the following variables.
-##
-#song_window_title_format = {%a - }{%t}|{%f}
-##
-## Note: Below variables are used for sorting songs in browser.  The sort mode
-## determines how songs are sorted, and can be used in combination with a sort
-## format to specify a custom sorting format.  Available values for
-## browser_sort_mode are "type", "name", "mtime", "format" and "none".
-##
-#
-#browser_sort_mode = type
-#
-#browser_sort_format = {%a - }{%t}|{%f} {%l}
-#
-##### columns settings #####
-##
-## syntax of song columns list format is "column column etc."
-##
-## - syntax for each column is:
-##
-## (width of the column)[color of the column]{displayed tag}
-##
-## Note: Width is by default in %, if you want a column to have fixed size, add
-## 'f' after the value, e.g. (10)[white]{a} will be the column that take 10% of
-## screen (so the real width will depend on actual screen size), whereas
-## (10f)[white]{a} will take 10 terminal cells, no matter how wide the screen
-## is.
-##
-## - color is optional (if you want the default one, leave the field empty).
-##
-## Note: You can give a column additional attributes by putting appropriate
-## character after displayed tag character. Available attributes are:
-##
-## - r - column will be right aligned
-## - E - if tag is empty, empty tag marker won't be displayed
-##
-## You can also:
-##
-## - give a column custom name by putting it after attributes, separated with
-##   character ':', e.g. {lr:Length} gives you right aligned column of lengths
-##   named "Length".
-##
-## - define sequence of tags, that have to be displayed in case predecessor is
-##   empty in a way similar to the one in classic song format, i.e. using '|'
-##   character, e.g. {a|c|p:Owner} creates column named "Owner" that tries to
-##   display artist tag and then composer and performer if previous ones are not
-##   available.
-##
-#
-#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
-#
-##### various settings #####
-#
-##
-## Note: Custom command that will be executed each time song changes. Useful for
-## notifications etc.
-##
-#execute_on_song_change = ""
-#
-##
-## Note: Custom command that will be executed each time player state
-## changes. The environment variable MPD_PLAYER_STATE is set to the current
-## state (either unknown, play, pause, or stop) for its duration.
-##
-#
-#execute_on_player_state_change = ""
-#
-#playlist_show_mpd_host = no
-#
-#playlist_show_remaining_time = no
-#
-#playlist_shorten_total_times = no
-#
-#playlist_separate_albums = no
-#
-##
-## Note: Possible display modes: classic, columns.
-##
-#playlist_display_mode = columns
-#
-#browser_display_mode = classic
-#
-#search_engine_display_mode = classic
-#
-#playlist_editor_display_mode = classic
-#
-#discard_colors_if_item_is_selected = yes
-#
-#show_duplicate_tags = yes
-#
-#incremental_seeking = yes
-#
-#seek_time = 1
-#
-#volume_change_step = 2
-#
-#autocenter_mode = no
-#
-#centered_cursor = no
-#
-##
-## Note: You can specify third character which will be used to build 'empty'
-## part of progressbar.
-##
-#progressbar_look = =>
-#
-## Available values: database, playlist.
-##
-#default_place_to_search_in = database
-#
-## Available values: classic, alternative.
-##
-#user_interface = classic
-#
-#data_fetching_delay = yes
-#
-## Available values: artist, album_artist, date, genre, composer, performer.
-##
-#media_library_primary_tag = artist
-#
-#media_library_albums_split_by_date = yes
-#
-#media_library_hide_album_dates = no
-#
-## Available values: wrapped, normal.
-##
-#default_find_mode = wrapped
-#
-#default_tag_editor_pattern = %n - %t
-#
-#header_visibility = yes
-#
-#statusbar_visibility = yes
-#
-## Show the "Connected to ..." message on startup
-#connected_message_on_startup = yes
-#
-#titles_visibility = yes
-#
-#header_text_scrolling = yes
-#
-#cyclic_scrolling = no
-#
-#lyrics_fetchers = azlyrics, genius, musixmatch, sing365, metrolyrics, justsomelyrics, jahlyrics, plyrics, tekstowo, zeneszoveg, internet
-#
-#follow_now_playing_lyrics = no
-#
-#fetch_lyrics_for_current_song_in_background = no
-#
-#store_lyrics_in_song_dir = no
-#
-#generate_win32_compatible_filenames = yes
-#
-#allow_for_physical_item_deletion = no
-#
-##
-## Note: If you set this variable, ncmpcpp will try to get info from last.fm in
-## language you set and if it fails, it will fall back to english. Otherwise it
-## will use english the first time.
-##
-## Note: Language has to be expressed as an ISO 639 alpha-2 code.
-##
-#lastfm_preferred_language = en
-#
-#space_add_mode = add_remove
-#
-#show_hidden_files_in_local_browser = no
-#
-##
-## How shall screen switcher work?
-##
-## - "previous" - switch between the current and previous screen.
-## - "screen1,...,screenN" - switch between given sequence of screens.
-##
-## Screens available for use: help, playlist, browser, search_engine,
-## media_library, playlist_editor, tag_editor, outputs, visualizer, clock,
-## lyrics, last_fm.
-##
-#screen_switcher_mode = playlist, browser
-#
-##
-## Note: You can define startup screen by choosing screen from the list above.
-##
-#startup_screen = playlist
-#
-##
-## Note: You can define startup slave screen by choosing screen from the list
-## above or an empty value for no slave screen.
-##
-#startup_slave_screen = ""
-#
-#startup_slave_screen_focus = no
-#
-##
-## Default width of locked screen (in %).  Acceptable values are from 20 to 80.
-##
-#
-#locked_screen_width_part = 50
-#
-#ask_for_locked_screen_width_part = yes
-#
-#jump_to_now_playing_song_at_start = yes
-#
-#ask_before_clearing_playlists = yes
-#
-#clock_display_seconds = no
-#
-#display_volume_level = yes
-#
-#display_bitrate = no
-#
-#display_remaining_time = no
-#
-## Available values: none, basic, extended, perl.
-##
-#regular_expressions = perl
-#
-##
-## Note: if below is enabled, ncmpcpp will ignore leading "The" word while
-## sorting items in browser, tags in media library, etc.
-##
-#ignore_leading_the = no
-#
-##
-## Note: if below is enabled, ncmpcpp will ignore diacritics while searching and
-## filtering lists. This takes an effect only if boost was compiled with ICU
-## support.
-##
-#ignore_diacritics = no
-#
-#block_search_constraints_change_if_items_found = yes
-#
-#mouse_support = yes
-#
-#mouse_list_scroll_whole_page = no
-#
-#lines_scrolled = 5
-#
-#empty_tag_marker = <empty>
-#
-#tags_separator = " | "
-#
-#tag_editor_extended_numeration = no
-#
-#media_library_sort_by_mtime = no
-#
-#enable_window_title = yes
-#
-##
-## Note: You can choose default search mode for search engine. Available modes
-## are:
-##
-## - 1 - use mpd built-in searching (no regexes, pattern matching)
-##
-## - 2 - use ncmpcpp searching (pattern matching with support for regexes, but
-##       if your mpd is on a remote machine, downloading big database to process
-##       it can take a while
-##
-## - 3 - match only exact values (this mode uses mpd function for searching in
-##       database and local one for searching in current playlist)
-##
-#
-#search_engine_default_search_mode = 1
-#
-#external_editor = nano
-#
-## Note: set to yes if external editor is a console application.
-##
-#use_console_editor = yes
-#
-##### colors definitions #####
-##
-## It is possible to set a background color by setting a color value
-## "<foreground>_<background>", e.g. red_black will set foregound color to red
-## and background color to black.
-##
-## In addition, for terminals that support 256 colors it is possible to set one
-## of them by using a number in range [1, 256] instead of color name,
-## e.g. numerical value corresponding to red_black is 2_1. To find out if the
-## terminal supports 256 colors, run ncmpcpp and check out the bottom of the
-## help screen for list of available colors and their numerical values.
-##
-## What is more, there are two special values for the background color:
-## "transparent" and "current". The first one explicitly sets the background to
-## be transparent, while the second one allows you to preserve current
-## background color and change only the foreground one. It's used implicitly
-## when background color is not specified.
-##
-## Moreover, it is possible to attach format information to selected color
-## variables by appending to their end a colon followed by one or more format
-## flags, e.g. black:b or red:ur. The following variables support this syntax:
-## visualizer_color, color1, color2, empty_tag_color, volume_color,
-## state_line_color, state_flags_color, progressbar_color,
-## progressbar_elapsed_color, player_state_color, statusbar_time_color,
-## alternative_ui_separator_color.
-##
-## Note: due to technical limitations of older ncurses version, if 256 colors
-## are used there is a possibility that you'll be able to use only colors with
-## transparent background.
-#
-#colors_enabled = yes
-#
-#empty_tag_color = cyan
-#
-#header_window_color = default
-#
-#volume_color = default
-#
-#state_line_color = default
-#
-#state_flags_color = default:b
-#
-#main_window_color = yellow
-#
-#color1 = white
-#
-#color2 = green
-#
-#progressbar_color = black:b
-#
-#progressbar_elapsed_color = green:b
-#
-#statusbar_color = default
-#
-#statusbar_time_color = default:b
-#
-#player_state_color = default:b
-#
-#alternative_ui_separator_color = black:b
-#
-#window_border_color = green
-#
-#active_window_border = red
-#