From a7b0020125ae45923d8f39e067cf3e48a68dce00 Mon Sep 17 00:00:00 2001 From: Charlie Root Date: Wed, 12 Mar 2025 19:08:13 +0100 Subject: [PATCH] kak and niri --- config.kdl | 443 ++++++++++++++++++++++++++++++++++++++++++++++++++ kak/kakrc | 75 +++++++++ kak/tv/tv.kak | 32 ++++ 3 files changed, 550 insertions(+) create mode 100644 config.kdl create mode 100644 kak/kakrc create mode 100644 kak/tv/tv.kak diff --git a/config.kdl b/config.kdl new file mode 100644 index 0000000..bcbba07 --- /dev/null +++ b/config.kdl @@ -0,0 +1,443 @@ +// This config is in the KDL format: https://kdl.dev +// "/-" comments out the following node. +// Check the wiki for a full description of the configuration: +// https://github.com/YaLTeR/niri/wiki/Configuration:-Overview + +// Input device configuration. +// Find the full list of options on the wiki: +// https://github.com/YaLTeR/niri/wiki/Configuration:-Input +input { + keyboard { + xkb { + // You can set rules, model, layout, variant and options. + // For more information, see xkeyboard-config(7). + + // For example: + // layout "gb,ru" + + layout "gb,ru,de" + variant ",phonetic_winkeys," + options "grp:rctrl_rshift_toggle, caps:escape" + + } + repeat-rate 60 + repeat-delay 200 + } + + touchpad { + tap + } + // Uncomment this to make the mouse warp to the center of newly focused windows. + // warp-mouse-to-focus + + // Focus windows and outputs automatically when moving the mouse into them. + // Setting max-scroll-amount="0%" makes it work only on windows already fully on screen. + focus-follows-mouse max-scroll-amount="0%" +} + +output "eDP-1" { + mode "1920x1080@59.999" + + scale 1 + + position x=0 y=0 +} + +// Settings that influence how windows are positioned and sized. +// Find more information on the wiki: +// https://github.com/YaLTeR/niri/wiki/Configuration:-Layout +layout { + // Set gaps around windows in logical pixels. + gaps 1 + + // When to center a column when changing focus, options are: + // - "never", default behavior, focusing an off-screen column will keep at the left + // or right edge of the screen. + // - "always", the focused column will always be centered. + // - "on-overflow", focusing a column will center it if it doesn't fit + // together with the previously focused column. + center-focused-column "never" + + // You can customize the widths that "switch-preset-column-width" (Mod+R) toggles between. + preset-column-widths { + // Proportion sets the width as a fraction of the output width, taking gaps into account. + // For example, you can perfectly fit four windows sized "proportion 0.25" on an output. + // The default preset widths are 1/3, 1/2 and 2/3 of the output. + proportion 0.5 + proportion 1.0 + + // Fixed sets the width in logical pixels exactly. + // fixed 1920 + } + + // You can also customize the heights that "switch-preset-window-height" (Mod+Shift+R) toggles between. + // preset-window-heights { } + + // You can change the default width of the new windows. + default-column-width { proportion 1.0; } + // If you leave the brackets empty, the windows themselves will decide their initial width. + // default-column-width {} + + // By default focus ring and border are rendered as a solid background rectangle + // behind windows. That is, they will show up through semitransparent windows. + // This is because windows using client-side decorations can have an arbitrary shape. + // + // If you don't like that, you should uncomment `prefer-no-csd` below. + // Niri will draw focus ring and border *around* windows that agree to omit their + // client-side decorations. + // + // Alternatively, you can override it with a window rule called + // `draw-border-with-background`. + + // You can change how the focus ring looks. + focus-ring { + // Uncomment this line to disable the focus ring. + // off + + // How many logical pixels the ring extends out from the windows. + width 2 + + // Colors can be set in a variety of ways: + // - CSS named colors: "red" + // - RGB hex: "#rgb", "#rgba", "#rrggbb", "#rrggbbaa" + // - CSS-like notation: "rgb(255, 127, 0)", rgba(), hsl() and a few others. + + // Color of the ring on the active monitor. + active-color "red" + + // Color of the ring on inactive monitors. + inactive-color "#505050" + + } + + // You can also add a border. It's similar to the focus ring, but always visible. + border { + off + } + + // Struts shrink the area occupied by windows, similarly to layer-shell panels. + // You can think of them as a kind of outer gaps. They are set in logical pixels. + // Left and right struts will cause the next window to the side to always be visible. + // Top and bottom struts will simply add outer gaps in addition to the area occupied by + // layer-shell panels and regular gaps. +} + + +// xwayland stuff +spawn-at-startup "xwayland-satellite" + +environment { + DISPLAY ":0" +} + +// Add lines like this to spawn processes at startup. +// Note that running niri as a session supports xdg-desktop-autostart, +// which may be more convenient to use. +// See the binds section below for more spawn examples. +// spawn-at-startup "alacritty" "-e" "fish" + +// Uncomment this line to ask the clients to omit their client-side decorations if possible. +// If the client will specifically ask for CSD, the request will be honored. +// Additionally, clients will be informed that they are tiled, removing some client-side rounded corners. +// This option will also fix border/focus ring drawing behind some semitransparent windows. +// After enabling or disabling this, you need to restart the apps for this to take effect. +prefer-no-csd + +// no saving screenshots +screenshot-path null + + +switch-events { + lid-close { spawn "swaylock"; } +} + + +workspace "keepass" +// Open Fractal on the "chat" workspace, if it runs at niri startup. +window-rule { + match app-id=r#"^org\.keepassxc\.KeePassXC$"# + open-on-workspace "keepass" +} + +// Animation settings. +// The wiki explains how to configure individual animations: +// https://github.com/YaLTeR/niri/wiki/Configuration:-Animations +animations { + // Uncomment to turn off all animations. + // off + + // Slow down all animations by this factor. Values below 1 speed them up instead. + // slowdown 3.0 +} + +// Window rules let you adjust behavior for individual windows. +// Find more information on the wiki: +// https://github.com/YaLTeR/niri/wiki/Configuration:-Window-Rules + +// Work around WezTerm's initial configure bug +// by setting an empty default-column-width. +window-rule { + // This regular expression is intentionally made as specific as possible, + // since this is the default config, and we want no false positives. + // You can get away with just app-id="wezterm" if you want. + match app-id=r#"^org\.wezfurlong\.wezterm$"# + default-column-width {} +} + +// Open the Firefox picture-in-picture player as floating by default. +window-rule { + // This app-id regular expression will work for both: + // - host Firefox (app-id is "firefox") + // - Flatpak Firefox (app-id is "org.mozilla.firefox") + match app-id=r#"firefox$"# title="^Picture-in-Picture$" + open-floating true +} + +// Example: block out two password managers from screen capture. +// (This example rule is commented out with a "/-" in front.) +window-rule { + match app-id=r#"^org\.keepassxc\.KeePassXC$"# + + block-out-from "screen-capture" +} + +binds { + // Keys consist of modifiers separated by + signs, followed by an XKB key name + // in the end. To find an XKB name for a particular key, you may use a program + // like wev. + // + // "Mod" is a special modifier equal to Super when running on a TTY, and to Alt + // when running as a winit window. + // + // Most actions that you can bind here can also be invoked programmatically with + // `niri msg action do-something`. + + // Mod-Shift-/, which is usually the same as Mod-?, + // shows a list of important hotkeys. + Mod+Shift+Slash { show-hotkey-overlay; } + + // Suggested binds for running programs: terminal, app launcher, screen locker. + Mod+Return { spawn "foot"; } + Mod+D { spawn "wmenu-run"; } + Super+Alt+L { spawn "swaylock"; } + + // Example volume keys mappings for PipeWire & WirePlumber. + // The allow-when-locked=true property makes them work even when the session is locked. + XF86AudioRaiseVolume allow-when-locked=true { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.1+"; } + XF86AudioLowerVolume allow-when-locked=true { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.1-"; } + XF86AudioMute allow-when-locked=true { spawn "wpctl" "set-mute" "@DEFAULT_AUDIO_SINK@" "toggle"; } + XF86AudioMicMute allow-when-locked=true { spawn "wpctl" "set-mute" "@DEFAULT_AUDIO_SOURCE@" "toggle"; } + + Mod+Q { close-window; } + + Mod+Left { focus-column-left; } + Mod+Down { focus-window-down; } + Mod+Up { focus-window-up; } + Mod+Right { focus-column-right; } + Mod+H { focus-column-left; } + Mod+J { focus-window-down; } + Mod+K { focus-window-up; } + Mod+L { focus-column-right; } + + Mod+Ctrl+Left { move-column-left; } + Mod+Ctrl+Down { move-window-down; } + Mod+Ctrl+Up { move-window-up; } + Mod+Ctrl+Right { move-column-right; } + Mod+Ctrl+H { move-column-left; } + Mod+Ctrl+J { move-window-down; } + Mod+Ctrl+K { move-window-up; } + Mod+Ctrl+L { move-column-right; } + + // Alternative commands that move across workspaces when reaching + // the first or last window in a column. + // Mod+J { focus-window-or-workspace-down; } + // Mod+K { focus-window-or-workspace-up; } + // Mod+Ctrl+J { move-window-down-or-to-workspace-down; } + // Mod+Ctrl+K { move-window-up-or-to-workspace-up; } + + Mod+Home { focus-column-first; } + Mod+End { focus-column-last; } + Mod+Ctrl+Home { move-column-to-first; } + Mod+Ctrl+End { move-column-to-last; } + + Mod+Shift+H { focus-monitor-left; } + Mod+Shift+J { focus-monitor-down; } + Mod+Shift+K { focus-monitor-up; } + Mod+Shift+L { focus-monitor-right; } + + Mod+Shift+Ctrl+Left { move-column-to-monitor-left; } + Mod+Shift+Ctrl+Down { move-column-to-monitor-down; } + Mod+Shift+Ctrl+Up { move-column-to-monitor-up; } + Mod+Shift+Ctrl+Right { move-column-to-monitor-right; } + Mod+Shift+Ctrl+H { move-column-to-monitor-left; } + Mod+Shift+Ctrl+J { move-column-to-monitor-down; } + Mod+Shift+Ctrl+K { move-column-to-monitor-up; } + Mod+Shift+Ctrl+L { move-column-to-monitor-right; } + + // Alternatively, there are commands to move just a single window: + // Mod+Shift+Ctrl+Left { move-window-to-monitor-left; } + // ... + + // And you can also move a whole workspace to another monitor: + // Mod+Shift+Ctrl+Left { move-workspace-to-monitor-left; } + // ... + + Mod+Page_Down { focus-workspace-down; } + Mod+Page_Up { focus-workspace-up; } + Mod+U { focus-workspace-down; } + Mod+I { focus-workspace-up; } + Mod+Ctrl+Page_Down { move-column-to-workspace-down; } + Mod+Ctrl+Page_Up { move-column-to-workspace-up; } + Mod+Ctrl+U { move-column-to-workspace-down; } + Mod+Ctrl+I { move-column-to-workspace-up; } + + // Alternatively, there are commands to move just a single window: + // Mod+Ctrl+Page_Down { move-window-to-workspace-down; } + // ... + + Mod+Shift+Page_Down { move-workspace-down; } + Mod+Shift+Page_Up { move-workspace-up; } + Mod+Shift+U { move-workspace-down; } + Mod+Shift+I { move-workspace-up; } + + // You can bind mouse wheel scroll ticks using the following syntax. + // These binds will change direction based on the natural-scroll setting. + // + // To avoid scrolling through workspaces really fast, you can use + // the cooldown-ms property. The bind will be rate-limited to this value. + // You can set a cooldown on any bind, but it's most useful for the wheel. + Mod+WheelScrollDown cooldown-ms=150 { focus-workspace-down; } + Mod+WheelScrollUp cooldown-ms=150 { focus-workspace-up; } + Mod+Ctrl+WheelScrollDown cooldown-ms=150 { move-column-to-workspace-down; } + Mod+Ctrl+WheelScrollUp cooldown-ms=150 { move-column-to-workspace-up; } + + Mod+WheelScrollRight { focus-column-right; } + Mod+WheelScrollLeft { focus-column-left; } + Mod+Ctrl+WheelScrollRight { move-column-right; } + Mod+Ctrl+WheelScrollLeft { move-column-left; } + + // Usually scrolling up and down with Shift in applications results in + // horizontal scrolling; these binds replicate that. + Mod+Shift+WheelScrollDown { focus-column-right; } + Mod+Shift+WheelScrollUp { focus-column-left; } + Mod+Ctrl+Shift+WheelScrollDown { move-column-right; } + Mod+Ctrl+Shift+WheelScrollUp { move-column-left; } + + // Similarly, you can bind touchpad scroll "ticks". + // Touchpad scrolling is continuous, so for these binds it is split into + // discrete intervals. + // These binds are also affected by touchpad's natural-scroll, so these + // example binds are "inverted", since we have natural-scroll enabled for + // touchpads by default. + // Mod+TouchpadScrollDown { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.02+"; } + // Mod+TouchpadScrollUp { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.02-"; } + + // You can refer to workspaces by index. However, keep in mind that + // niri is a dynamic workspace system, so these commands are kind of + // "best effort". Trying to refer to a workspace index bigger than + // the current workspace count will instead refer to the bottommost + // (empty) workspace. + // + // For example, with 2 workspaces + 1 empty, indices 3, 4, 5 and so on + // will all refer to the 3rd workspace. + Mod+1 { focus-workspace 1; } + Mod+2 { focus-workspace 2; } + Mod+3 { focus-workspace 3; } + Mod+4 { focus-workspace 4; } + Mod+5 { focus-workspace 5; } + Mod+6 { focus-workspace 6; } + Mod+7 { focus-workspace 7; } + Mod+8 { focus-workspace 8; } + Mod+9 { focus-workspace 9; } + Mod+Ctrl+1 { move-column-to-workspace 1; } + Mod+Ctrl+2 { move-column-to-workspace 2; } + Mod+Ctrl+3 { move-column-to-workspace 3; } + Mod+Ctrl+4 { move-column-to-workspace 4; } + Mod+Ctrl+5 { move-column-to-workspace 5; } + Mod+Ctrl+6 { move-column-to-workspace 6; } + Mod+Ctrl+7 { move-column-to-workspace 7; } + Mod+Ctrl+8 { move-column-to-workspace 8; } + Mod+Ctrl+9 { move-column-to-workspace 9; } + + // Alternatively, there are commands to move just a single window: + // Mod+Ctrl+1 { move-window-to-workspace 1; } + + // Switches focus between the current and the previous workspace. + // Mod+Tab { focus-workspace-previous; } + + // The following binds move the focused window in and out of a column. + // If the window is alone, they will consume it into the nearby column to the side. + // If the window is already in a column, they will expel it out. + Mod+BracketLeft { consume-or-expel-window-left; } + Mod+BracketRight { consume-or-expel-window-right; } + + // Consume one window from the right to the bottom of the focused column. + Mod+Comma { consume-window-into-column; } + // Expel the bottom window from the focused column to the right. + Mod+Period { expel-window-from-column; } + + Mod+R { switch-preset-column-width; } + Mod+Shift+R { switch-preset-window-height; } + Mod+Ctrl+R { reset-window-height; } + Mod+F { maximize-column; } + Mod+Shift+F { fullscreen-window; } + + // Expand the focused column to space not taken up by other fully visible columns. + // Makes the column "fill the rest of the space". + Mod+Ctrl+F { expand-column-to-available-width; } + + Mod+C { center-column; } + + // Finer width adjustments. + // This command can also: + // * set width in pixels: "1000" + // * adjust width in pixels: "-5" or "+5" + // * set width as a percentage of screen width: "25%" + // * adjust width as a percentage of screen width: "-10%" or "+10%" + // Pixel sizes use logical, or scaled, pixels. I.e. on an output with scale 2.0, + // set-column-width "100" will make the column occupy 200 physical screen pixels. + Mod+Minus { set-column-width "-10%"; } + Mod+Equal { set-column-width "+10%"; } + + // Finer height adjustments when in column with other windows. + Mod+Shift+Minus { set-window-height "-10%"; } + Mod+Shift+Equal { set-window-height "+10%"; } + + // Move the focused window between the floating and the tiling layout. + Mod+V { toggle-window-floating; } + Mod+Shift+V { switch-focus-between-floating-and-tiling; } + + // Toggle tabbed column display mode. + // Windows in this column will appear as vertical tabs, + // rather than stacked on top of each other. + Mod+W { toggle-column-tabbed-display; } + + // Actions to switch layouts. + // Note: if you uncomment these, make sure you do NOT have + // a matching layout switch hotkey configured in xkb options above. + // Having both at once on the same hotkey will break the switching, + // since it will switch twice upon pressing the hotkey (once by xkb, once by niri). + // Mod+Space { switch-layout "next"; } + // Mod+Shift+Space { switch-layout "prev"; } + + Print { screenshot; } + Ctrl+Print { screenshot-screen; } + Alt+Print { screenshot-window; } + + // Applications such as remote-desktop clients and software KVM switches may + // request that niri stops processing the keyboard shortcuts defined here + // so they may, for example, forward the key presses as-is to a remote machine. + // It's a good idea to bind an escape hatch to toggle the inhibitor, + // so a buggy application can't hold your session hostage. + // + // The allow-inhibiting=false property can be applied to other binds as well, + // which ensures niri always processes them, even when an inhibitor is active. + Mod+Escape allow-inhibiting=false { toggle-keyboard-shortcuts-inhibit; } + + // The quit action will show a confirmation dialog to avoid accidental exits. + Mod+Shift+E { quit; } + + // Powers off the monitors. To turn them back on, do any input like + // moving the mouse or pressing any other key. + Mod+Shift+P { power-off-monitors; } +} diff --git a/kak/kakrc b/kak/kakrc new file mode 100644 index 0000000..491fa37 --- /dev/null +++ b/kak/kakrc @@ -0,0 +1,75 @@ +# some usable colorscheme +colorscheme gruvbox-dark + +# line numbers +add-highlighter global/ number-lines -hlcursor -relative -separator " " -cursor-separator " |" + +# show matching parens +add-highlighter global/ show-matching + +set-option global tabstop 4 +set-option global indentwidth 4 + + +# show trailing whitespace +add-highlighter global/ regex \h+$ 0:Error + +# softwrap long lines +add-highlighter global/ wrap -word -indent + +# no terminal assistant +set global ui_options terminal_assistant=none terminal_enable_mouse=false + +# tab completions +hook global InsertCompletionShow .* %{ + try %{ + # this command temporarily removes cursors preceded by whitespace; + # if there are no cursors left, it raises an error, does not + # continue to execute the mapping commands, and the error is eaten + # by the `try` command so no warning appears. + execute-keys -draft 'h\h' + map window insert + map window insert + hook -once -always window InsertCompletionHide .* %{ + unmap window insert + unmap window insert + } + } +} + +# lsp +eval %sh{kak-lsp} +lsp-enable + +lsp-auto-signature-help-enable +lsp-auto-hover-enable +lsp-auto-hover-insert-mode-enable + +map global user l ':enter-user-mode lsp' -docstring 'LSP mode' + +map global insert ':try lsp-snippets-select-next-placeholders catch %{ execute-keys -with-hooks tab> }' -docstring 'Select next snippet placeholder' + +map global object a 'lsp-object' -docstring 'LSP any symbol' +map global object 'lsp-object' -docstring 'LSP any symbol' +map global object f 'lsp-object Function Method' -docstring 'LSP function or method' +map global object t 'lsp-object Class Interface Struct' -docstring 'LSP class interface or struct' +map global object d 'lsp-diagnostic-object --include-warnings' -docstring 'LSP errors and warnings' +map global object D 'lsp-diagnostic-object' -docstring 'LSP errors' + + +# copy to device clipboard +hook global RegisterModified '"' %{ nop %sh{ + wl-copy -- "$kak_main_reg_dquote" 2> /dev/null; +}} + +# plugins +source "%val{config}/plugins/plug.kak/rc/plug.kak" +plug "andreyorst/plug.kak" noload + +plug "andreyorst/fzf.kak" + +map global user f ': fzf-mode' -docstring 'fzf mode' + +# # custom plugins +# source ~/.config/kak/tv/tv.kak + diff --git a/kak/tv/tv.kak b/kak/tv/tv.kak new file mode 100644 index 0000000..61a58fe --- /dev/null +++ b/kak/tv/tv.kak @@ -0,0 +1,32 @@ +# define-command run-tv %{ evaluate-commands %sh{ +# # Create a temporary fifo for communication +# tv_tmp="$(mktemp -d "${TMPDIR:-/tmp}"/tv.kak.XXXXXX)" + + +# tv_out="${tv_tmp}/tvcmd" +# result="${tv_tmp}/result" + +# mkfifo ${tv_out} + +# # run command detached from the shell +# { tv > ${tv_out} } > /dev/null 2>&1 < /dev/null & + +# # Open the file in Kakoune and add a hook to remove the fifo +# echo "edit! -fifo ${tv_out} *buffer-name* +# hook buffer BufClose .* %{ nop %sh{ rm -r $(dirname ${tv_tmp})} }" + +# } +# } +# +# +define-command bla %{ evaluate-commands %sh{ +# Create a temporary fifo for communication + output=$(mktemp -d -t kak-temp-XXXXXXXX)/fifo + mkfifo ${output} + # run command detached from the shell + { lazygit > ${output} } > /dev/null 2>&1 < /dev/null & + # Open the file in Kakoune and add a hook to remove the fifo + echo "edit! -fifo ${output} *buffer-name* + hook buffer BufClose .* %{ nop %sh{ rm -r $(dirname ${output})} }" +} } +